Ply Van Racking
PLY VANRACKING
DECEMBER OFFER: 15% OFFVIEW OFFER →
HOME/BLOG/CAN YOU MOVE YOUR VAN RACKING TO A NEW VAN?

Can you move your van racking to a new van?

4 min readPly Van Racking
Can you move your van racking to a new van?

You have spent years getting the layout right, and now it is bolted into a van that is about to go back. In most cases racking can come out and go back in. Here is what makes that straightforward, what usually needs adapting, and when starting fresh is the better call.

Changing the van is one of the few times a good fit-out feels like an inconvenience. The layout works, everything has a home, and all of it is bolted into a vehicle that is about to go back.

The short answer is yes: in most cases racking can be removed and reinstalled, or adapted to fit. How straightforward that is comes down to the two vehicles rather than the racking itself, and it is worth knowing which way yours is likely to go before you commit.

Why moving it usually beats replacing it

The first reason is cost. A system built in ply or hex phenolic will comfortably outlast the vehicle it is fitted to, so when the van goes there is normally plenty of life left in the racking. Adapting and refitting panels you already own costs a long way short of a full rebuild.

The second is the layout, and it matters more than people expect. You already know which shelf is the wrong height, what you never reach for and where the drawer should have gone. Starting from nothing means relearning the back of the van at the same time as learning the van, and the first weeks of running a new vehicle are busy enough without it.

What makes a move straightforward

Like for like is the easy case. Same make and model, or a close equivalent on the same platform, and a system generally goes back in much as it came out.

Similar size and body shape is the next best thing. Between medium wheelbase vans of broadly the same length and roof height, most of a fit-out transfers with modest changes. The same holds at the larger end, where long wheelbase vans from different makers are often closer in internal dimensions than the badge suggests.

What decides it is the load area, not the make: internal length, width between the arches, height to the roof, and where the mounting points sit. Measure those on both vans and you will know more than guesswork.

What usually needs adapting

Even a close match rarely drops straight in. Wheel arches are the usual one: height, width and position all vary, so side units sitting over an arch are first in line for a new base or a trimmed panel.

The bulkhead is next. Full, half or none at all changes the usable load length and where the front unit can be anchored. Door openings catch people out too: side door width decides what can run across that side of the van, and rear aperture height can mean a drawer no longer clears on the way out. A lower roof means tall shelving comes down to suit.

Then the fixings. Racking should be bolted through the van's own load-rated mounting points rather than into the lining, and those sit in different places in every vehicle, so they change even when the panels do not.

When starting fresh makes more sense

A big change in size is the clearest case. Taking a long wheelbase system into a short wheelbase van is a rebuild with extra steps, and going the other way leaves a half empty van that does not use the space.

Condition is the other. Racking with swollen edges, soft corners or a floor that has taken water is not worth paying to refit, and the difference between hex phenolic and standard ply shows up exactly at this point in a system's life.

Sometimes the work has simply moved on. If the layout suits a side of the trade you no longer do, planning a fit-out around how you work now is better money than reinstalling something you have outgrown.

Before the old van goes back

Leave time for the strip-out. Taking racking out is quicker than fitting it, but it is not a Friday afternoon job, and a lease inspection or a part exchange valuation will notice a rushed one.

Fixings come out and holes get made good. The ply lining that has been taking the knocks is usually why the load area still presents well, which is part of why a fit-out protects what the van is worth rather than costing you at the end.

Photograph the layout before anything comes out. It is the quickest reference anyone has when it goes back together.

Find out what moves and what does not

Most systems have another van in them, and the only way to be sure is to look at both vehicles against what you have. Take a look at our van racking and ply lining systems to see how ours are built and mounted, or book a free design consultation and we will work out what transfers, what needs adapting and what is better rebuilt.

Tags

  • moving van racking
  • transfer van racking
  • changing van
  • van fit out
  • van racking

Keep reading

You might also like